 To support the Project Manager, Engineering Manager and carry out Project management functions as direct by Project Manager.  To provide expertise and experience in related matters during design engineering , fabrication and offshore installation.  To contact and interface with COMPANY/CLIENT and Sub-contractor in Project Engineering Matters related to pipeline load out, transportation engineering, pipeline installation engineering and pipe laying barge operation.  To advise ..... (continued)

To undertake Piping engineering design work in with true regard to Safety both in design detail and engineering design execution To carry out design work in compliance with the national, state and client asset Codes & Standards. To engineer all design work in line with the QA manual and company procedures. To be innovative in design work with due regard to minimisation of cost whilst maintaining technical integrity To undertake all work within the estimated man hour budget and within schedule To assist in ..... (continued)

• Review related Engineering document and provide necessary inputs to other Company’s Project discipline managers in terms of constructability, construction sequence/ execution plan/ risks during the engineering phase and for planning purpose. • Plan, manage and coordinate all construction works such as onshore fabrication/ LOSF/ Transportation / Offshore Installation and Modificaitons/ Hook-up and Tie-ins in a joint effort with QA/QC, HSE and Commissioning teams to ensure Health, Safety & Environment ..... (continued)

The purpose of the position is to obsever and direct the O&M contract management in a manner that achieves the Company’s corporate objectives of achieving the Clients production targets and Company’s cost effectiveness, safety, environment, employee development and industrial harmony within the constraints if a remote offshore environment. An important part of this position consists of managing all the operation, safety and pollution aspects of the FPSO/FSO in accordance with O&M contract as well as Client ..... (continued)

David, We are looking for some experts to perform O&M jobs at a Combined Cycle Power Plant at Lebanon. Please give us some expert’s CV as below: 1- Head of supervision team: (I am clarifying this position if it is Maintenance Manager or OPS Mng) • Minimum total experience in operation and maintenance of power plants 15 years. • Experience as power plant manager of 3 years. • Experience in supervision and management of power plants for 3 years. 2- Instrumentation and control expert: • Minimum total ..... (continued)

4- Maintenance expert: • Minimum total experience of 10 years. • Experience in maintenance of power plants of 5 years. • Experience in supervision and management of power plants for 3 years as expert in maintenance procedure

Analysis and Tools Skills - Hands-on experience and thorough knowledge on using pipeline engineering software and their limitations • AUTOPIPE • OFFPIPE • MATHCAD • AGA • DNV OS F101 • FATFREE • STABLE LINES • FEA analysis (ABAQUS and ANSYS) - Troubleshoot Error Reports - Able to review results and solutions Design Basis, Codes Design basis, specifications - Possess in-depth knowledge of industrial codes and standards, client’s specs and work scope etc - Able to develop design basis based on client’s scope ..... (continued)

Be responsible for the design, analysis and engineering on pipeline projects , in cooperation with the other resources to assure the integrity of company assets on a continuing basis. Static equipment includes pressure vessel, piping, tanks, pipeline and platform structures. Provide input to fields plan development on pipeline; Oversee 3rd party inspection activities on pressure vessels, piping, tanks, pipelines and platform structures. Prepare the risk profile for the assets which summarize performance and ..... (continued)

1. Position Objective and General Responsibilities In a joint effort with the Engineering Contractor, Equipment Vendor, Company Engineering team to review, and partake in engineering, producing, installation, testing of mechanical and rotating equipment systems for the Owner Field facilities, which are safe, efficient and operations friendly. To foster and maintain the team approach, as a senior member of the engineering team. 2. Main tasks and Specific Responsibilities • Engineering review and comment on ..... (continued)

- Coordinates and monitors the activities of assigned contractors performing work within the Electrical and Instrumentation disciplines and ensures compliance with project safety, quality, schedule, cost and security requirements - Review E&I Construction, PFD & P&ID Drawings, Loop diagrams for Installation, testing and commissioning. Excellent Reporting skills, Quality of work and perform assigned duties. 

 - Planning, supervision and co-ordination for, Loop check, Pre-commissioning and ..... (continued)

The main area of responsibility is to ensure that all equipment is available to safely meet production targets and performance standards. - Performed installing, commissioning on electrical equipments such as lightings, power distribution panel generators, motors, and motor controls.
 - Performed loop and continuity check on all wiring and termination, insulation resistance and test all cables and wiring.
 - Perform injection test on all protection relay and metering, check fuses rating and ..... (continued)

- Calibration of pneumatic pressure transmitter, level transmitter, Pressure Switch, Loop checking of instrument wiring, termination of internal wiring for the DCS cabinet, assisting to vendor, termination of secondary cable for Fire & Gas detector, conducts preliminary inspection with sub-contractors & the final inspection with the client inspectors on field instrument installation.
 - Calibration and maintenance of H2S detectors.
 - 
Installation, commissioning, calibration and ..... (continued)

Responsible for carrying out project activities, pre-commissioning / commissioning. Discharge the duties of Permit coordinator, responsible for the implementation, control and monitoring of the Permit to Work system. Involved in all the major factory acceptance tests and inspection of major modules in vendor yard. Ensure equipment installation is correct and in line with the FPSO layout drawings. Develop Manual Operating Procedures, Start-up & Shutdown Procedures, risk assessments and other related ..... (continued)

- Coordinates and monitors the activities of assigned contractors performing work within the Electrical and Instrumentation disciplines and ensures compliance with project safety, quality, schedule, cost and security requirements - Review E&I Construction, PFD & P&ID Drawings, Loop diagrams for Installation, testing and commissioning. Excellent Reporting skills, Quality of work and perform assigned duties. 

 - Planning, supervision and co-ordination for, Loop check, Pre-commissioning and ..... (continued)

The Night Drilling Supervisor reports directly to the Senior Drilling Supervisor and functionally to the Drilling Superintendent and is required to perform the following duties prior to the delivery of the TAD:- • Assist the Senior Drilling Supervisor as directed. • Represent company at all FAT/commissioning of equipment and systems on the company. • Review each of company detailed work instructions for every rig based operation to ensure all hazards are adequately identified and controlled. • Attend pre ..... (continued)

• Responsible for all well planning and engineering design for HPHT well (200degC, 14000psi) • Review and improve current Well Design. • Prepare detailed drilling programs & budgets. • Prepare drilling reports and final well reports. • Coordinate with other team members and other department within the company to ensure the delivery of technical well objectives. • Participate in technical tender preparation and evaluation when required. • Support Drilling Superintendent & Drilling Manager for daily ..... (continued)

Preferably possess a recognized degree in Engineering or Science Must have at least 15 years diversified petroleum industry experience gained through long exposure to the drilling, workover and completion activities on floating rig, jack-up and platform rig. Must have at least 03 cumulative years experience as a Drilling Supervisor with reputable petroleum companies. Prefereably has experience working in Offshore Vietnam and experience in basement drilling. The latest job is Drilling Supervisor. Shall ..... (continued)

Preferably possess a recognised degree in Engineering or Science * Must have at least 15 years dIIersified petroleum industry experience gained through long exposure to the drilling, workover and completion actIIities on floating rig, jack-up and platform rig. * Must have at least 5 years experience as a Senior Drilling Supervisor with a reputable petroleum company. * Has experience working in Offshore Vietnam and experience in basement drilling. * Must possess a valid IWCF well control certificate. * ..... (continued)

1. The EMPLOYEE shall also provide assistance to develop the engineering skills for local engineering by providing on-the-job-training if required. 2. The EMPLOYEE shall perform and complete the Services in timely manner in accordance with the agreed schedule and with the EMPLOYER’s requested. 3. The EMPLOYEE shall guarantee and be responsible for the sufficiency, accuracy and quality of the Services. 4. The EMPLOYEE shall make Weekly and Monthly reports to EMPLOYER’s Project Manager giving progress against ..... (continued)

Key responsibilities: • Responsible for all well planning and engineering design for HPHT well (200degC, 14000psi) • Review and improve current Well Design. • Prepare detailed drilling programs & budgets. • Prepare drilling reports and final well reports. • Coordinate with other team members and other department within the company to ensure the delivery of technical well objectives. • Participate in technical tender preparation and evaluation when required. • Support Drilling Superintendent & Drilling ..... (continued)

The purpose of the position is to obsever and direct the O&M contract management in a manner that achieves the Company’s corporate objectives of achieving the Clients production targets and Company’s cost effectiveness, safety, environment, employee development and industrial harmony within the constraints if a remote offshore environment. An important part of this position consists of managing all the operation, safety and pollution aspects of the FPSO/FSO in accordance with O&M contract as well as Client ..... (continued)

• Review related Engineering document and provide necessary inputs to other Company’s Project discipline managers in terms of constructability, construction sequence/ execution plan/ risks during the engineering phase and for planning purpose. • Plan, manage and coordinate all construction works such as onshore fabrication/ LOSF/ Transportation / Offshore Installation and Modificaitons/ Hook-up and Tie-ins in a joint effort with QA/QC, HSE and Commissioning teams to ensure Health, Safety & Environment ..... (continued)